Le leader national des instruments de métrologie
Le leader national des instruments de métrologie
Flow Switch MR
● High switching power
● Compact design
Characteristics
Mechanical flow switch, for fluid or gaseous media, with
spring-supported piston and magnetic triggering of a reed switch.
Robust construction in brass or stainless steel.
Handling and Operation
Note
● Install straight calming section of 5 x DN in inlet and outlet.
● Include a filter if the media are dirty (use magnetic filter for
ferritic components).
● It must be ensured that the values given for voltage, current,
and power are not exceeded.
● When switch on, a load must be connected in series.
● The electrical details apply to ohmic loads. Capacitive,
inductive and lamp loads must be operated using a protective
circuit.
Adjustment
If it is necessary to set the switching value, the switching head can
be adjusted lengthways
Garanties sécurité
Politique de livraison
Politique retours
● High switching power
● Compact design
Characteristics
Mechanical flow switch, for fluid or gaseous media, with
spring-supported piston and magnetic triggering of a reed switch.
Robust construction in brass or stainless steel.
Handling and Operation
Note
● Install straight calming section of 5 x DN in inlet and outlet.
● Include a filter if the media are dirty (use magnetic filter for
ferritic components).
● It must be ensured that the values given for voltage, current,
and power are not exceeded.
● When switch on, a load must be connected in series.
● The electrical details apply to ohmic loads. Capacitive,
inductive and lamp loads must be operated using a protective
circuit.
Adjustment
If it is necessary to set the switching value, the switching head can
be adjusted lengthways When the switching value is reached, the
switching unit is fixed in place by fastening bolts.
Technical data :
Switch : reed switch
Nominal width : DN 8.0.25
Process connection : female thread G 1/4..G 1
(further process connections available on request)
Switching range : 0.4..60 l/min
Pressure loss : 0.4..1.9 bar at Qmax.
Qmax : to 80 l/min
Tolerance : ±5 % of full scale value
Pressure resistance : PN 200 bar (with optional display O1 G 1/4..G 3/4 PN 90)
Media temperature : -20..+120 °C
Ambient temperature : -20..+70 °C
Media : water (oils, gases and aggressive media available on request)
Switching voltage : max. 175 V DC / 120 V AC
Switching current : max. 0.25 A DC / 0.18 A AC
Switching capacity : max. 5 W / VA
Protection class : 2 - safety insulation
Ingress protection : IP 65
Electrical connection : cable 2.5 m (others cable lengths available on request)
MR-008..025GM/K
Références spécifiques
Aucun commentaire pour le moment
● High switching power
● Compact design
Characteristics
Mechanical flow switch, for fluid or gaseous media, with
spring-supported piston and magnetic triggering of a reed switch.
Robust construction in brass or stainless steel.
Handling and Operation
Note
● Install straight calming section of 5 x DN in inlet and outlet.
● Include a filter if the media are dirty (use magnetic filter for
ferritic components).
● It must be ensured that the values given for voltage, current,
and power are not exceeded.
● When switch on, a load must be connected in series.
● The electrical details apply to ohmic loads. Capacitive,
inductive and lamp loads must be operated using a protective
circuit.
Adjustment
If it is necessary to set the switching value, the switching head can
be adjusted lengthways