Switching Head

Référence: A-V3

Switching Head A-V3 For devices VM-

● II 2G Ex d IIC T6 Gb

Switching head with pressure-resistant encapsulation and ATEX approval for the VM range of devices.

Switch : micro switch

Handling and operation
Note

● Cable lengths max. 5 m.
● It must be ensured that the values given for voltage, current,
and power are not exceeded.
● When switched on, a load must be connected in series.
● The electrical details apply to ohmic loads.
Capacitive, inductive and lamp loads must be operated using a
protective circuit.

Adjustment

To adjust the switching point, the fixing screw for the switching
head must be loosened. The switching head can then be rotated.
Turning to the right increases the switching point, and vice-versa.
Then retighten the fixing screw.

Switching Head A-V3 For devices VM-

● II 2G Ex d IIC T6 Gb

Switching head with pressure-resistant encapsulation and ATEX approval for the VM range of devices.

Switching voltage    : max. 250 V AC
Switching current                  : max. 5 A
Protection class                      2 - safety insulation
Ingress protection    : IP 65
Electrical                               : cable 2.5 m, other cable lengths optionally
connection                            : available

Switch : micro switch

Handling and operation
Note

Adjustment

Ordering code

The base device is ordered, e.g. VM-015GR020A with switching
head e.g. A-V3-1.

Use for devices

Switching head Device type

A-V3 VM-...