- Nouveau
Nouveaux produits
Nouveaux produits
Flow Transmitter LABO-RT-I / U / F / C
Flow Transmitter LABO-RT-I / U / F / C
● High precision
● No magnetic components in the flow space
● High pressure resistance
● 0..10 V, 4..20 mA , frequency/pulse output, completely configurable
Characteristics :
A turbine acts as the primary sensor; its rotational speed is proportional to the flow rate. The rotational speed is detected by means of pre-tensioned Hall sensors, i.e. there are no magnets in the flow space. The LABO-RT electronics make various output signals available:
● Analog signal 0/4..20 mA (LABO-RT-I)
● Analog signal 0/2..10 V (LABO-RT-U)
● Frequency signal (LABO-RT-F) or
● Value signal pulse / x litres (LABO-RT-C)
A model with switching output is also available (see separate datasheet).
If desired, the range end value can be set to the currently existing flow using "teaching"
A turbine acts as the primary sensor; its rotational speed is proportional to the flow rate. The rotational speed is detected by means of pre-tensioned Hall sensors, i.e. there are no magnets in the flow space. The LABO-RT electronics make various output signals available:
● Analog signal 0/4..20 mA (LABO-RT-I)
● Analog signal 0/2..10 V (LABO-RT-U)
● Frequency signal (LABO-RT-F) or
● Value signal pulse / x litres (LABO-RT-C)
A model with switching output is also available (see separate datasheet).
If desired, the range end value can be set to the currently existing flow using "teaching"
Fiche technique
- Medium temperature
- -20..+85 °C optionally -20..+150 °C (for 8 bar min.)
- Ambient temperature
- -20..+70 °C
- Sensor
- turbine with biased Hall sensor
- Nominal width
- DN 15..50 (others on request)
- Process connection
- G 1 /2 A...G 2 A
- Metering ranges
- see table "Ranges"
- Measurement accuracy
- ±1 % of full scale value in the specified metering range including linearity and repeatability
- Storage temperature
- -20..+80 °C
- Max. particle size
- 0,5mm
- Pressure loss (average)
- 0.3 bar at Qmax.