Nouveaux produits

Nouveaux produits

All new products

Liens utiles

Liens utiles

Événements

Our Client Says

Our Client Says

Accueil

Subcategories

Grid
List

Il y a 1324 produits.

Trier par :

Affichage 621-640 de 1324 article(s)

- Nouveau
Aperçu rapide
Signal converter LABO-W...I / U / F / C

Signal converter LABO-W...I / U / F / C

● Signal converter for looping into the sensor line
● Conversion of voltages, currents or frequencies into current, voltage, frequency or pulse signals
● 16-bit microcontroller
● Linearized
● Numerous configurable parameters
● A parameter can be set locally
● Affordable

Characteristics :

The LABO-W signal converters are designed for the measurement
of sensor signals and their conversion into standard signals (cur-
rent 4..20 mA, voltage 0..10 V, frequencies up to 2 kHz, pulse sig-
nals). For this purpose, they have a powerful 16-bit microcontroller
in their compact housing.
- Nouveau
Aperçu rapide
Limit switch LABO-W...S

Limit switch LABO-W...S

● Limit switch for looping into the sensor line

● Evaluation of voltages, currents or frequencies

● 16-bit microcontroller

● Numerous configurable parameters

● A parameter can be set locally

● Affordable

Characteristics :

The LABO-W limit switches are designed for the measurement and evaluation of sensor signals. For this purpose, they have a powerful 16-bit microcontroller in their compact housing. The standard versions are designed such that currents, voltages and frequencies which are common for industrial applications can be measured.
- Nouveau
Aperçu rapide
Flow Transmitter / Switch OMNI-RT

Flow Transmitter / Switch OMNI-RT

● Universal turbine flow sensor

● Analog output, two switching outputs

● Clear, easily legible, illuminated LCD display

● Modifiable units in the display

● Designed for industrial use

● Small, compact construction

● Simple installation

Characteristics :

A turbine acts as the primary sensor; its rotational speed is proportional to the flow rate. The rotational speed is detected by means of pre-tensioned Hall sensors, i.e. there are no magnets in the flow space. The OMNI transducer located on the sensor has a backlit graphics LCD display which is very easy to read, both in the dark and in bright sunlight.
- Nouveau
Aperçu rapide
Flow Transmitter RT-...AK

Flow Transmitter RT-...AK

● High precision

● No magnetic components in the flow space

● High pressure resistance

Characteristics :

A turbine acts as the primary sensor; its rotational speed is proportional to the flow rate.

The rotational speed is detected by means of a biased Hall sensors, i.e. there are no magnets in the flow space.
- Nouveau
Aperçu rapide
Flow Transmitter LABO-RT-I / U / F / C

Flow Transmitter LABO-RT-I / U / F / C

● High precision

● No magnetic components in the flow space

● High pressure resistance

● 0..10 V, 4..20 mA , frequency/pulse output, completely configurable

Characteristics :

A turbine acts as the primary sensor; its rotational speed is proportional to the flow rate. The rotational speed is detected by means of pre-tensioned Hall sensors, i.e. there are no magnets in the flow space. The LABO-RT electronics make various output signals available:

● Analog signal 0/4..20 mA (LABO-RT-I)

● Analog signal 0/2..10 V (LABO-RT-U)

● Frequency signal (LABO-RT-F) or

● Value signal pulse / x litres (LABO-RT-C)

A model with switching output is also available (see separate datasheet).

If desired, the range end value can be set to the currently existing flow using "teaching"
- Nouveau
Aperçu rapide
Switching head A-H1.1

Switching head A-H1.1

● I M1 Ex ia I Ma
● II 1G Ex ia IIC T4 Ga
● II 1D Ex ia IIIC T135°C Da

Characteristics :

Intrinsically safe switching head with reed switch and ATEX
approval, for the HD range of devices, for use in intrinsically safe power circuits.

Handling and operation
Note
All
●For use only in intrinsically safe power circuits - provide a suitable isolating amplifier.
●Cable lengths max. 5 m.
●It must be ensured that the values given for voltage, current, and power are not exceeded.
●When switched on, a load must be connected in series.
●The electrical details apply to ohmic loads. Capacitive, inductive and lamp loads must be operated using a protective circuit.

HD1KO- / HD2KO-
●Display with plastic parts - do not open in an explosive atmosphere.
- Nouveau
Aperçu rapide
Flow Transmitter / Switch FLEX-RT

Flow Transmitter /Switch FLEX-RT
● Versatile turbine flow sensor
● Switching output and analog output (4..20 mA / 0..10 V)
● Top quality materials
● Designed for industrial use
● Ingress protection IP 67
● Infinitely adjustably rotatable cable outlet for clean
alignment
● Small, compact construction
● Very simple installation
Characteristics :
A turbine acts as the primary sensor; its rotational speed is
proportional to the flow rate. The rotational speed is detected by
means of a biased Hall sensors, i.e. there are no magnets in the
flow space.
The FLEX transducer located on the sensor has an analog output
(4..20 mA or 0..10 V) and a switching output, which can be
configured as a limit switch for monitoring minimal or maximal, or
as a frequency output.
- Nouveau
Aperçu rapide
Flow Switch LABO-RT-S

Flow Switch LABO-RT-S

● Very short response time
● High precision
● No magnetic components in the flow space
● High pressure resistance

Characteristics

A turbine acts as the primary sensor; its rotational speed is
proportional to the flow rate. The rotational speed is detected by
means of pre-tensioned Hall sensors, i.e. there are no magnets in
the flow space.
The integrated converter / counter make available an electronic
switching output (push-pull) with adjustable characteristics
(minimum/maximum) and hysteresis, which responds when an
adjustable limit is fallen short of or exceeded.
The switching value can be set to the currently existing flow using
"teaching".
Models with analog or pulse output are also available.
- Nouveau
Aperçu rapide
Flow Indicator HV

Flow Indicator HV

● Bidirectional
● 360 ° visibility

Characteristics :

The flow indicator HV is used for the reliable display of transparent
fluids. A signal-red turbine wheel rotates in a glass tube
proportional to the flow, and in this way provides an indication of
the flow rate present.
The devices provide 360 ° vision, and are built for a long working
life, thanks to the design of the turbine's bearings.
- Nouveau
Aperçu rapide
Flow Switch MR1K-

Flow Switch MR1K

● High switching power
● Compact design

Characteristics :

Mechanical flow switch, for fluid or gaseous media, with
spring-supported piston and magnetic triggering of a reed switch.
Robust construction in brass or stainless steel.

Handling and Operation
Note
● Include straight calming section of 5 x DN in inlet and outlet
● Include a filter if the media are dirty (use magnetic filter for
ferritic components).
● It must be ensured that the values given for voltage, current,
and power are not exceeded.
● When switch on, a load must be connected in series.
● The electrical details apply to ohmic loads. Capacitive,
inductive and lamp loads must be operated using a protective circuit.

Adjustment
If it is necessary to set the switching value,
the switching head can be adjusted
lengthways.
- Nouveau
Aperçu rapide
Flow Switch MR

● High switching power
● Compact design

Characteristics

Mechanical flow switch, for fluid or gaseous media, with
spring-supported piston and magnetic triggering of a reed switch.
Robust construction in brass or stainless steel.

Handling and Operation
Note
● Install straight calming section of 5 x DN in inlet and outlet.
● Include a filter if the media are dirty (use magnetic filter for
ferritic components).
● It must be ensured that the values given for voltage, current,
and power are not exceeded.
● When switch on, a load must be connected in series.
● The electrical details apply to ohmic loads. Capacitive,
inductive and lamp loads must be operated using a protective
circuit.

Adjustment
If it is necessary to set the switching value, the switching head can
be adjusted lengthways
- Nouveau
Aperçu rapide
Flow Switch FX

Mechanical flow switch, for fluid media, with magnetic triggering of a reed switch. Plastic housing with integrated filter.

● Adjusted switching value
● Integrated filter
● High switching power
● Optional flow limiter in the outlet piece

Handling and operation

● Include straight calming section of 5 x DN in inlet and outlet
● It must be ensured that the values given for voltage, current,
and power are not exceeded.
● When switch on, a load must be connected in series.
● The electrical details apply to ohmic loads. Capacitive,
inductive and lamp loads must be operated using a protective circuit.
- Nouveau
Aperçu rapide
Switching Head

Switching Head A-V2 For devices VM-

●I M1 Ex ia Ma
●II 1G Ex ia IIC T4 Ga
●II 1D Ex ia IIIC T135°C Da

Intrinsically safe switching head with reed switch and ATEX approval, for the VM range of devices, for use in intrinsically safe power circuits.

Handling and operation
Note
●For use only in intrinsically safe power circuits; provide a suitable isolating amplifier.
●Cable lengths max. 5 m.
●It must be ensured that the values given for voltage, current, and power are not exceeded.
●When switched on, a load must be connected in series.
●The electrical details apply to ohmic loads. Capacitive, inductive and lamp loads must be operated using a protective circuit.

Adjustment
To adjust the switching point, the fixing screw for the switching
head must be loosened. The switching head can then be rotated.
- Nouveau
Aperçu rapide
Switching Head

Switching Head A-V3 For devices VM-

● II 2G Ex d IIC T6 Gb

Switching head with pressure-resistant encapsulation and ATEX approval for the VM range of devices.

Switch : micro switch

Handling and operation
Note

● Cable lengths max. 5 m.
● It must be ensured that the values given for voltage, current,
and power are not exceeded.
● When switched on, a load must be connected in series.
● The electrical details apply to ohmic loads.
Capacitive, inductive and lamp loads must be operated using a
protective circuit.

Adjustment

To adjust the switching point, the fixing screw for the switching
head must be loosened. The switching head can then be rotated.
Turning to the right increases the switching point, and vice-versa.
Then retighten the fixing screw.
- Nouveau
Aperçu rapide
Switching Head
I M1 Ex ia I Ma

II 1G Ex ia IIC T4 Ga

II 1D Ex ia IIIC T135°C Da

Intrinsically safe switching head with reed switch and ATEX approval, for the VD range of devices, for use in intrinsically safe power circuits.
- Nouveau
Aperçu rapide
convertisseur de mesure Humidité/température

convertisseur de mesure Humidité/température

(tube de sonde latéral, FL = 50 mm)

- Affichage sur site de la température et de l'humidité atmosphérique

- Signal sortie entièrement modulable

- Plage de température jusqu'à 120 °C

- Réétalonnage par l'utilisateur possible

- Séparation galv. des canaux Humidité atmosphérique et Température

- Signaux de sortie possibles : 4-20 mA, 0-1 V ou 0-10 V
- Nouveau
Aperçu rapide
Capteurs de pression en acier inoxydable

Capteur de pression en acier inoxydable (parties en contact) convient aux milieux agressifs, à l'eau, etc.
- Nouveau
Aperçu rapide
Capteurs de pression en acier inoxydable

Capteur de pression en acier inoxydable (parties en contact) convient aux milieux agressifs, à l'eau, etc
- Nouveau
Aperçu rapide
ENREGISTREUR POUR SIGNAL NORMALISÉ

ENREGISTREUR POUR SIGNAL NORMALISÉ (16 000 mes.) pour transmetteurs etc..     : T-Logg 120 W

                           (avec fiche coudée pour intégration)

Plage de mesure                         :    -1999 à 9999 points
                                 programmable
Virgule décimale                             :     réglable
Signaux d'entrée    : 1 seul choix possible !
                                                              0-1 V, 0-2 V, 0-10 V, 0-20 mA ou 4-20 mA
                                                              autre signaux d'entrée sur demande
                                                              (pas de sép. galv. entre l'entrée et l'interface)
- Nouveau
Aperçu rapide
ENREGISTREUR D'IMPULSIONS

EASYLOG 40IMP/S : ENREGISTREUR D'IMPULSIONS mesures de consommation et de débit, comptage de pièces, etc

(48000 mesures) utilisation universelle

Affichage 621-640 de 1324 article(s)

1
…
31
32
33
…
67