• Nouveau

Flow Transmitter/Switch

LABO-HD2K-I / U / F / C

Flow Transmitter/Switch

● 4..20 mA output linearised
● 0..10V output linearised
● Frequency output proportional, linear
● Programmable through teaching
● LED for status display
● All metal housing
● Fully potted IP 67
● All parameters programmable via USB interface ECI-1

Characteristics
Mechanical flow switch, for oil, with spring-supported piston and
magnetic triggering of Hall sensors. Robust construction in brass or
stainless steel.
The LABO electronics make various output signals available:
● Analog signal 0/4...20 mA (LABO-HD2K-...I)
● Analog signal 0/2..10 V (LABO-HD2K-...U)
● Frequency signal (LABO-HD2K-...F) or
● A value signal Pulse / x Litres (LABO-HD2K-...C)
A model with switching output is also available.
If desired, the range end value can be set to the currently existing
flow using "teaching".

Flow Transmitter/Switch

● 4..20 mA output linearised
● 0..10V output linearised
● Frequency output proportional, linear
● Programmable through teaching
● LED for status display
● All metal housing
● Fully potted IP 67
● All parameters programmable via USB interface ECI-1

Characteristics
Mechanical flow switch, for oil, with spring-supported piston and
magnetic triggering of Hall sensors. Robust construction in brass or
stainless steel.
The LABO electronics make various output signals available:
● Analog signal 0/4...20 mA (LABO-HD2K-...I)
● Analog signal 0/2..10 V (LABO-HD2K-...U)
● Frequency signal (LABO-HD2K-...F) or
● A value signal Pulse / x Litres (LABO-HD2K-...C)
A model with switching output is also available.
If desired, the range end value can be set to the currently existing
flow using "teaching".

Ranges :
Details in the table apply to horizontal inwards flow with increasing
flow rate.

LABO-HD2K-I / U / F / C

Fiche technique

Ambient temperature
-20..+70 °C
Sensor
analog Hall sensors
Nominal width
DN 8..25
Process connection
female thread G 1/4..G 1
Metering ranges
0.5..60 l/min
Pressure loss (average)
1.1..3.5 bar at Qmax.
Supply voltage
18..30 V DC
Qmax
To 80 l/min
Tolerance
±3 % of full scale value
Pressure resistance
PN 200 bar, optionally PN 500 bar
Media
oils
Media temperature
-20..+85 °C optionally -20..+120 °C

Téléchargement

HD2K

HD2K

Téléchargement (528.73KB)

16 autres produits dans la même catégorie :