Flow Indicator FH-...GR

● No moving parts internally

● Installation location as desired

● For heavily soiled or coloured fluids

● Double-sided large-surface window

● Natural glass

Characteristics :

Devices made from solid red bronze, where the medium can be visually examined through the sight glass (fluid level, colour, bubbles,...)

Technical Data WO1-...GM/K

● No moving parts internally

● Installation location as desired

● For heavily soiled or coloured fluids

● Natural glass, acrylic glass

Characteristics :

Devices made from solid brass, where the medium can be visually examined through the sight glass (fluid level, colour, bubbles,...)

Flow indicator, sight glass WO1-…GM/K

● No moving parts internally

● Internal wiper provides ability to clean the glass without removing the device.

● Installation location as desired

● For heavily soiled or coloured fluids

● 360 ° visibility

Characteristics :

Devices made from solid brass or stainless steel, where the medium can be visually examined through the sight glass (fluid level, colour, bubbles, ...). A wiper makes it possible to clean the sight glass. 

Flow Indicator SK-...GR

● High temperature resistance

● Double-sided large-surface window

● Natural glass

● Display of flow rate

Characteristics :

Mechanical flow indicator for fluid media. A stainless steel flap in the area of flow is lifted by the volume flow, and indicates the present flow rate. 

Flow Display H1O1 / H2O1

● No electrical supply required
● Individually calibrated display
● Compact design

Characteristics :
A piston fitted with a magnet is pushed through the medium against
the force of a spring. This activates the pointer of the measuring
device by means of a magnetic coupling. Because of the hermetic
separation from the medium, the display unit cannot be soiled by
the medium.

Ranges :
Details in the table correspond to horizontal inwards flow with
increasing flow rate.

Handling and Operation :
● Include straight calming section of 5 x DN in inlet and outlet.
● If the media are dirty, install a filter
(use magnetic filter for ferritic components)

Signal converter LABO-W...I / U / F / C

● Signal converter for looping into the sensor line
● Conversion of voltages, currents or frequencies into current, voltage, frequency or pulse signals
● 16-bit microcontroller
● Linearized
● Numerous configurable parameters
● A parameter can be set locally
● Affordable

Characteristics :

The LABO-W signal converters are designed for the measurement
of sensor signals and their conversion into standard signals (cur-
rent 4..20 mA, voltage 0..10 V, frequencies up to 2 kHz, pulse sig-
nals). For this purpose, they have a powerful 16-bit microcontroller
in their compact housing.

Limit switch LABO-W...S

● Limit switch for looping into the sensor line

● Evaluation of voltages, currents or frequencies

● 16-bit microcontroller

● Numerous configurable parameters

● A parameter can be set locally

● Affordable

Characteristics :

The LABO-W limit switches are designed for the measurement and evaluation of sensor signals. For this purpose, they have a powerful 16-bit microcontroller in their compact housing. The standard versions are designed such that currents, voltages and frequencies which are common for industrial applications can be measured. 

Flow Transmitter /Switch FLEX-RT

● Versatile turbine flow sensor
● Switching output and analog output (4..20 mA / 0..10 V)
● Top quality materials
● Designed for industrial use
● Ingress protection IP 67
● Infinitely adjustably rotatable cable outlet for clean
alignment
● Small, compact construction
● Very simple installation

Characteristics :

A turbine acts as the primary sensor; its rotational speed is
proportional to the flow rate. The rotational speed is detected by
means of a biased Hall sensors, i.e. there are no magnets in the
flow space.
The FLEX transducer located on the sensor has an analog output
(4..20 mA or 0..10 V) and a switching output, which can be
configured as a limit switch for monitoring minimal or maximal, or
as a frequency output.

Flow Switch MR1K

● High switching power
● Compact design

Characteristics :

Mechanical flow switch, for fluid or gaseous media, with
spring-supported piston and magnetic triggering of a reed switch.
Robust construction in brass or stainless steel.

Handling and Operation
Note
● Include straight calming section of 5 x DN in inlet and outlet
● Include a filter if the media are dirty (use magnetic filter for
ferritic components).
● It must be ensured that the values given for voltage, current,
and power are not exceeded.
● When switch on, a load must be connected in series.
● The electrical details apply to ohmic loads. Capacitive,
inductive and lamp loads must be operated using a protective circuit.

Adjustment
If it is necessary to set the switching value,
the switching head can be adjusted
lengthways.

convertisseur de mesure Humidité/température

(tube de sonde latéral, FL = 50 mm)

- Affichage sur site de la température et de l'humidité atmosphérique

- Signal sortie entièrement modulable

- Plage de température jusqu'à 120 °C

- Réétalonnage par l'utilisateur possible

- Séparation galv. des canaux Humidité atmosphérique et Température

- Signaux de sortie possibles : 4-20 mA, 0-1 V ou 0-10 V

Capteur de pression en acier inoxydable (parties en contact) convient aux milieux agressifs, à l'eau, etc.

Capteur de pression en acier inoxydable (parties en contact) convient aux milieux agressifs, à l'eau, etc

      Convertisseurs de mesure de pression surpression, dépression et pression absolue  : S-10 REL

                  (standard, zéro électrique pour pression atmosphérique)

Description : Capteur de pression piézorésistif avec comp. de temp. Modèle
                      inox. entièrement soudé avec matière de remplissage compatible usage
                      alimentaire (16 bar max.) ou DMS à couche mince (à partie de 25 bar).

Plages de mesure             : en bar (autres valeurs sur demande)

S-10 REL und S-11REL    : 0,1, 0,16, 0,25, 0,4, 0,6, 1, 1,6, 2,5, 4, 6, 10, 16, 25, 40, 60, 100, 160, 250, 400, 600, 1000

S-10 ABS et S-11ABS      : 0,25, 0,4, 0,6, 1, 1,6, 2,5, 4, 6, 10, 16         

Plages de mesure (PM), Seuil de surcharge (SC)

Convertisseurs de mesure de pression  (pression rel., zéro électr. pour pression atm.)     :    A-10 

Utilisation générale : Toutes applications pour l'industrie des machinesoutils
et équipements, la robotique et le génie climatique et frigorifique.

Plage de mesure (PM), surcharge (SC), pression d'éclatement (PE) en bar :

• PM : 1, 1.6, 2.5, 4, 6, 10, 16, 25, 40, 60, 100, 160, 250, 400, 600
• SC : 2 3,2 5 8 12 20 32 50 80 120 200 320 500 800 1200
• PE : 5 10 10 17 34 34 100 100 400 550 800 1000 1200 1700 2400

Signal sortie                     : 4-20 mA, deux fils, RA [Ω] < (Uv [V] - 8 V)/0,02 A

                                             0-10 V, trois fils, RA > 10 kΩ

Courant auxiliaire Uv       : 8-30 Vc.c. (avec sortie : 4-20 mA)

GRMU 2000 MP sans électrode Convertisseur de mesure de redox à séparation galvanique  .

convertisseur de mesure pH de qualité avec compensation automatique de la température (avec sonde thermométrique enfichée).

Particularités

• Compensation de température manuelle ou automatique
• Sonde de température Pt1000 externe raccordable
• Entrée capteur à séparation galvanique
• Étalonnage à 2 points

convertisseur de mesure pH de qualité avec compensation automatique de la température (avec sonde thermométrique enfichée).

Particularités :

• Compensation de température manuelle ou automatique
• Sonde de température Pt1000 externe raccordable
• Entrée capteur à séparation galvanique
• Étalonnage à 2 points

Convertisseur de mesure d'oxygène pour de l'oxygène dissous dans des liquides

Transmetteur de mesure de conductivité avec électrode 4 pôles

Domaines d'application

• Concentrations élevées de sel (p. ex. mesure liquide antigel)
• Mesure dans solutions polluées / eaux usées
• Examen de neutralisations
• Liquides fortement pollués

GLMU 200 MP : Convertisseurs de mesure de la conductivité avec cellule de mesure à 2 pôles   

Domaines d'application

• Mesures de conductivité simples et avantageuses
• Surveillance de l'eau potable
• Pisciculture/surveillance des cours d'eau
• Aquariophilie d'eau douce et d'eau de mer